Evolution Microdeck® M 18kg

Evoluttion Microdeck® M is a single-component finishing microcement, specially designed for application on interior floors. With a medium texture, it is characterized by its natural and continuous aesthetic, with non-slip properties that make it an ideal option for high-traffic areas, such as homes, offices, and commercial establishments.

This high-performance coating is mixed only with water, eliminating the need for additional resins, which simplifies its use on site and guarantees a homogeneous result. It is compatible with radiant heating systems and can be applied over cement, mortar, ceramic, or plaster.

Main Features

1. Practical single-component: only requires water for mixing, no external resins needed.
2. High traffic resistance: optimal for floors subject to daily use.
3. Non-slip texture: natural finish that enhances safety.
4. Simple and quick application: ideal for decorative coating professionals.
5. Continuous and seamless finish: improves the aesthetics of modern interiors.

Detailed instructions for use

1. Substrate preparation
   • Ensure the substrate is clean, dry, consolidated, and free of grease or contaminants.
   • Apply an appropriate primer depending on the type of surface:
     • For absorbent substrates: Primacem Plus
     • For non-absorbent substrates: Primacem ABS
   • For ceramic surfaces, apply a prior bonding coat to improve adhesion.
2. Base application
   • Apply 2 coats of Evoluttion Microbase as a preparatory layer, sanding between coats with 40-grit sandpaper.
   • This step is mandatory to provide body and anchorage to the system.
3. Material preparation
   • Pour 4.5 liters of clean water for each 18 kg bag of Evoluttion Microdeck M.
   • Mix with a low-speed electric mixer for 2-3 minutes until a homogeneous, lump-free paste is obtained.
   • Allow the mixture to rest for 2 minutes before use.
4. Product application
   • Apply 2 thin coats of Evoluttion Microdeck M with a flexible steel trowel.
   • Respect the drying time between coats (approximately 4-6 hours).
   • Sand between coats with 80-120 grit sandpaper to achieve a fine and uniform finish.
   • The total thickness should not exceed 2 mm.
5. Sealing and final protection
   • Once the application is complete and fully dry (min. 24 hours), proceed with sealing using the protection system.
     
   
   

Performance

• Approximately 1.40 kg/m² per coat.

Technical Specifications

• Compressive strength: ≥ 30 N/mm²
• Flexural strength: ≥ 11 N/mm²
• Adhesion to substrate: ≥ 1.5 N/mm²
• Granulometry: 0.30 mm
• Powder density: 1.175 ± 0.050 g/cm³
• Format: 18 kg bag

Storage conditions

Store in a dry, ventilated place, protected from humidity, between 5 °C and 30 °C.
Shelf life: 12 months from the manufacturing date, in original sealed packaging.