Natture M 18kg

Natture® M 18 Kg is a two-component tadelakt microcement with a fine finish, ideal for creating continuous, highly aesthetic coatings on floors, walls, and architectural furniture. Its smooth texture and handcrafted finish provide a natural tadelakt or exposed concrete effect, combining elegance and resistance for interior and exterior projects. It belongs to the Natture® range, specially formulated for refined thin-layer finishes.

Main features

• Silky, natural finish with a handcrafted appearance.
• Applicable in layers of 1–3 mm, suitable for walkable and non-walkable areas.
• High mechanical hardness, low shrinkage, and excellent abrasion resistance.
• Very good adhesion to concrete, ceramic, plaster, MDF, plasterboard, and mortar.
• Allows for matte, satin, or gloss finishes depending on sanding and sealing.

Instructions for use

1. Prepare the substrate: clean, dry, firm; reinforce with mesh if necessary.
2. Apply appropriate primer (Primacem ABS/PLUS or Primapox depending on the substrate).
3. Mix 18 kg of component A with the corresponding volume of Acricem® B resin, and optionally pigments.
4. Mix at low speed for about 4 minutes until a homogeneous mixture is obtained.
5. Apply with a trowel in one or more coats, allowing to dry and sanding between coats to achieve a smooth finish.
6. Finally, seal with Presealer and Topsealer® products according to the desired finish.

Performance

• Approximately 1 Kg/m² per coat, total estimated yield in two coats: 2 Kg/m².
• 
  

Technical specifications

• Maximum grain size: 0.2 mm
• Application thickness: 1–3 mm
• Compressive strength (28 days): approximately 43.9 MPa
• Flexural strength (28 days): approximately 12.7 MPa
• Minimum adhesion: ≥ 1.2 N/mm²
• Continuous seamless finish
• Format: 18 Kg

Storage conditions

Store the product in its original sealed container, in a dry, ventilated place protected from sunlight, at temperatures between 10 °C and 30 °C. Maximum shelf life: 12 months from the manufacturing date.