Sttandard Microfino S 15kg

Sttandard Microfino® S is a two-component decorative finishing microcement, specially designed for application on interior walls. Its fine texture provides an elegant finish, silky to the touch and with a marked artisanal character. It acts as a finishing coat over a previous Microbase layer and is mixed with Acricem resin (component B) to guarantee excellent workability, adhesion, and resistance.

Main characteristics

1. Fine and silky texture, ideal for decorative vertical finishes.
2. Very aesthetic water effect, characteristic of manual work.
3. Great adhesion on substrates such as plaster, plasterboard, cement, etc.
4. Continuous coating, no joints required (except for structural expansion).
5. Customizable finish using different types of sealers (matte, satin, gloss).

How to use

1. Surface preparation:
   • Ensure a clean, dry surface, free of dust or grease.
   • Apply a previous base of two layers of Microbase, well-leveled.
2. Mixing:
   • Mix 10 kg of Microfino S with approximately 3.0–3.5 L of Acricem resin.
   • Dissolve the pigment in the resin beforehand and add the powder while mixing.
   • Mix with a low-speed electric mixer for at least 4 minutes until a homogeneous mass is obtained.
3. Application:
   • Apply two thin layers of Microfino S with a metal or rubber trowel.
   • Lightly sand between layers if a finer finish is desired.
   • Allow to dry completely before applying Topsealer sealer.
   
   

Performance

• Approx. 0.50 kg/m² in two coats on a previously regularized substrate.

Technical specifications

• Flexion (28 days): ≥ 7 N/mm²
• Compression (28 days): ≥ 22 N/mm²
• Adhesion to substrate (28 days): ≥ 1.2 N/mm²
• Maximum aggregate size: 0.1 mm
• Format: 15 kg plastic bucket

Storage conditions

Store in a dry, protected place, in its original closed container, between 5 °C and 30 °C. Shelf life: up to 1 year from the manufacturing date unopened.